Menu
Your Cart

Deepcool Casing

Deepcool MATREXX 70 Mid Tower Casing Deepcool MATREXX 70 Casing new-concept chassis specially designed for the enjoyment of DIY. By adopting numerous novel structural designs, its architecture yields convenience and flexibility in PC building. As a mid-tower case, it’s also endowed with abundant space that supports up to E-ATX motherboard.One-touch-release Front PanelWith the bottom hooked to case structure, and the top locked by a spring buckle, the front panel of MATREXX 70 can be released to “dismounting ready” state with just one touch. Once the “OPEN” button is pressed, the front panel will be released and held at a 5°angel, and is ready to be pulled out.Easy-to-install Side Panel The side panel is fixed with 1 groove + 2 screws design, which makes installation much easier. Plus, this unique fixation method will grant the glass panel even stress distribution, hence reduces the risk of cracking.Removable Radiator HolderThe radiator holder simplifies the installation of liquid coolers and replacement of the radiators. It’s especially effort-saving when you need to install radiators or fans on different sides of the holder.Removable tinted tempered Glass PSU ShroudIn MATREXX 70, DEEPCOOL creatively used tinted tempered glass as the top cover of PSU shroud, which is pioneering in the industry.Flexible Ventilation Solutions with Excellent PerformanceWith air intake options at front and bottom, exhaust options at the top and rear, MATREXX 70 provides highly flexible ventilation solutions. Meanwhile the 15mm-wide front intake hole guarantees sufficient air supply, together with the low friction material applied on all meshes, the cooling efficiency is maximized.Spacious InteriorThe case’s dimensions are 484×233×492mm, offering gigantic room to manage cables (170mm motherboard tray-to-glass clearance, 30mm motherboard tray-to-back plate clearance).Simple & Sleek DesignThe front and side panels are made of full-sized, tinted tempered glass. They display your gears with a classy filter while keeping the overall look clean .Abundant Storage SupportA total of 6* 2.5’’ drives or 4*2.5’’ + 2* 3.5’’ drives can be mounted in MATREXX 70. 2 SSD bays are fixed at the back of motherboard tray for quick installation. 2* 3.5/2.5’’ hard drive bays are mounted at the bottom of the case which are relocatable and removable.After removal, 2*120mm fans can be installed at the location.All-round Dust ProofDust filters are installed at the front, top and bottom of the case.The all-round and fine coverage offers remarkable dust-proof capabilities. Meanwhile the top filter is magnetic whereas the front/bottom filters are inserted, which makes them very easy to clean...
6,500৳
Ex Tax:6,500৳
CASEMotherboard Support ATX, Micro-ATX, Mini-ITXInternal Drive Bays 4 x 3.5" 3 x 2.5"Expansion Slots 8 x Full Height + 2Maximum GPU Length 6.69" / 170 mmFan Fan Mounting (Front) 3 x 120 mm ; Fan Mounting (Rear) 1 x 120 mm Or 1 x 140 mm ; Fan Mounting (Side) 3 x 120 mm Or 3 x 140 mm ; Fans Included (Rear)1 x 120 mm ;PSU ATXRadiator Fans Included (Rear) 1 x 120 mm Maximum Radiator Size (Front) 360 mm Maximum Radiator Size (Rear) 140 mm Maximum Radiator Size (Side) 420 mmMaterial Tempered Glass, SteelI/O Connections 2 x USB Type-A (USB 3.0) Audio Connections 1 x 3.5 mm Input 1 x 3.5 mm OutputDimensions 9.49 x 20.47 x 20.71" / 241 x 520 x 526 mmCable Management Space 0.98" / 25 mmWeight 26.9 lb / 12.2 kgOverviewE-ATX, ATX, Micro-ATX, Mini-ITX Support Tempered-Glass Side and Front Panels 2 x 3.5" Drive Bays 4 x 2.5" Drive Bays 7 + 2 Expansion Slots 4 x 120 mm Fans Included Liquid Cooling Support One-Button Front-Panel Release Quick-Mounting Radiator Holder Removable Tempered-Glass PSU ShroudDeepcool MATREXX 70 ADD-RGB 3F Case The MATREXX 70 ADD-RGB 3F Mid-Tower ATX Case from Deepcool. Compatible with E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards, the MATREXX 70 boasts side and front tempered-glass panels, and the front panel can be released by pressing a single button. The case comes with two 3.5" and four 2.5" drive bays, along with a pre-installed 120mm rear fan and three 120mm RGB front fans. A radiator holder makes it easy to install liquid coolers and fans, while the tempered-glass PSU shroud is removable. A magnetic top dust allows for easy removal and cleaning...
8,600৳ 9,500৳
Ex Tax:8,600৳
Features Deepcool MATREXX 55 V3A compact ATX computer case supports motherboards up to E-ATX. Full-sized 4mm thickness, tempered glass side panel, and the front panel give the case a unique look and perfectly show off your inner structure. The addressable RGB lighting strip in the front is easily controlled by a manual button or via motherboard; Two extra connectors are ready for motherboard SYNC control with any combination with other DEEPCOOL/GAMER STORM brand 5V ADD-RGB devices and also other brand 5V ADD-RGB devices. Supports installation of 120/140/240/280/360mm radiator liquid cooling system in the front, 120/140/240mm radiator liquid cooling system on top, and 120mm radiator liquid cooling system in the back. Supports 370mm (MAX) long Graphics Card installation. Optimized airflow is guaranteed with large air intakes on two sides of the front panel, keeping your components cool. The 210mm wide tower compartment with 23mm clearance is perfect for cable management. A magnetic dustproof net on top and dust-filter in the front and bottom. With PSU shroud to keep internal neat and tidy.Deepcool MATREXX 55 V3 Overview Dual 4mm Tempered GlassFull-sized 4mm thickness, tempered glass side panel, and a front panel give the case a unique look to perfectly show off your inner structureMassive Cooling CompatibilityOptimized airflow is guaranteed with large air intakes on two sides of the front panel and an air exhaust in the back and on top, to keep your components coolCooling CompatibilitySupports the installation of Liquid Cooler120/140/240mm radiator liquid cooling system on the top 120mm radiator liquid cooling system in the rear 120/140/240/280/360mm radiator liquid cooling system in the frontsupports the installation of Cooling Fans2×120/2×140mm fan on the top 1×120mm fan in the rear 3×120mm or 3×140mm fan in the frontPSU Shroud AddedThe ADD-RGB version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tidy..
4,700৳ 5,500৳
Ex Tax:4,700৳
Features DEEPCOOL MATREXX 55 V3 ADD-RGB WH 3FA compact ATX computer case supports motherboards up to E-ATX. Full-sized 4mm thickness, tempered glass side panel, and the front panel give the case a unique look and perfectly show off your inner structure. The addressable RGB lighting strip in the front is easily controlled by a manual button or via motherboard; Two extra connectors are ready for motherboard SYNC control with any combination with other DEEPCOOL/GAMER STORM brand 5V ADD-RGB devices and also other brand 5V ADD-RGB devices. Supports installation of 120/140/240/280/360mm radiator liquid cooling system in the front, 120/140/240mm radiator liquid cooling system on top, and 120mm radiator liquid cooling system in the back. Supports 370mm (MAX) long Graphics Card installation. Optimized airflow is guaranteed with large air intakes on two sides of the front panel, keeping your components cool. The 210mm wide tower compartment with 23mm clearance is perfect for cable management. A magnetic dustproof net on top and dust-filter in the front and bottom. With PSU shroud to keep internal neat and tidy.DEEPCOOL MATRIXX 55 V3 ADD-RGB WH 3F Overview Dual 4mm Tempered GlassDEEPCOOL MATRIXX 55 V3 ADD-RGB WH 3F Full-sized 4mm thickness, tempered glass side panel, and a front panel give the case a unique look to perfectly show off your inner structureMassive Cooling CompatibilityDEEPCOOL MATREXX 55 V3 ADD-RGB WH 3F Optimized airflow is guaranteed with large air intakes on two sides of the front panel and an air exhaust in the back and on top, to keep your components cool ..
7,500৳ 7,800৳
Ex Tax:7,500৳
Deepcool MATREXX 55 V3 ADD-RGB Case Deepcool MATREXX 55 V3 ADD-RGB Case is an ATX computer case that supports motherboards up to E-ATX. This casing is designed with Full-sized 4mm thickness, tempered glass side panel, and the front panel gives the case a unique look. In this case, the ADD-RGB lighting strip added in the front is easily controlled by a manual button or via a motherboard. This new MATREXX 55 V3 Mid-Tower supports installation of 120/ 140/ 240/ 280/ 360mm radiator liquid cooling system in the front, as well as 120/140/240mm radiator liquid cooling system on top and 120mm radiator liquid cooling system in the back panel. This MATREXX 55 V3 case supports 370mm (MAX) long Graphics Card installation, 160mm CPU Cooler Height Limit. Here, on two sides of the front panel, the Optimized airflow is guaranteed with large air intakes. The 210mm wide tower compartment with 23mm clearance is perfect for cable management for your case. This case also has a magnetic dustproof net on top and a dust filter on the front and bottom sides...
4,300৳ 4,500৳
Ex Tax:4,300৳
Deepcool Matrexx 55 V3 OverviewThe black Deepcool Matrexx 55 V3 ADD-RGB 3F Mid-Tower Case features a minimalistic design with plenty of room for your components. Inside, you'll be able to fit up to an E-ATX motherboard, two 3.5" drives, two 2.5" drives, and seven single-slot PCIe cards. Aesthetics-wise, it has tempered-glass front and side panels, as well as a pre-installed RGB lighting strip. Its cooling options include up to three 140mm fans at the front, two 140mm fans at the top, and a single 120mm fan at the rear.RGB Lighting EffectsThe Matrexx 55 V3 comes with an expandable RGB lighting system, three 120mm RGB fans, and a pre-installed RGB strip in the front. Users can control their lighting using the built-in buttons or via a compatible motherboard.Dual 4mm Tempered GlassThe front and left side panels are made with 4mm thick tempered glass, so users can show off their hardware and any RGB lighting they have installed.PSU ShroudA PSU shroud hides your power supply as well as the majority of your cables for a cleaner look...
6,600৳ 7,500৳
Ex Tax:6,600৳
Deepcool MATREXX 55 OverviewLight up your PC build while keeping your components clean and cool with the MATREXX 55 Mid-Tower ATX Case from Deepcool. Equipped with front and side tempered-glass panels, the MATREXX 55 features a front RGB light strip for showing off your build, while a pair of front air intakes help to optimize airflow. Designed for E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards, the case comes with two 3.5" and two 2.5" drive bays, along with room for front, top, and rear radiators. A magnet-mounted dust filter in top is designed for easy removal and cleaning.RGB Lighting EffectsAn RGB lighting strip in the front can be controlled by a button or via the motherboard. Extra connectors allow for motherboard sync control with other Deepcool/Gamerstorm 12V RGB devices.Dual 4mm Tempered GlassFull-sized 4mm-thick tempered-glass side and front panels are ideal for showing off your PC's internal structure.Airflow DesignThe case is designed for optimal airflow, with air intakes on two sides of the front panel and air exhaust vents in back and on top.Cable ManagementThe case offers 23mm of clearance to help optimize cable management.Top Dust FilterThe magnet-mounted dust filter at the top of the case is designed for easy removal and cleaning.The fake Windows update is a never ending process which can prank your friends when you open it in full screen (F11) on their computer...
3,700৳ 4,500৳
Ex Tax:3,700৳
DEEPCOOL MATREXX 55 Mesh Black Case Overview The Case is endowed with abundant space that supports up to E-ATX specification motherboards. Equipped with a meshed front panel, the intake channel provides abundant airflow for your system and keeps your entire build at a steady, sustainable temperature. As a minimalist case built for optimal airflow, the spacious interior of the Matrexx 55 Mesh keeps the case well-ventilated and will help solve all your thermal issues. In terms of design, DEEPCOOL MATREXX 55 Mesh Black Case features a meshed front panel and features a dust filter. With a meshed front panel, the intake channel provides abundant airflow for your system and maintains your entire build at a steady, sustainable temperature. DEEPCOOL MATREXX 55 Mesh solves all your thermal issues. Full-sized 4mm thickness, tempered glass side panel gives the case a unique look to perfectly show off your inner structure. Optimized airflow is guaranteed with large air intakes on both sides of the front panel and an air exhaust in the back and on top, to keep your components cool. The version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tidy. Finally, Cable managing is now easy with a 210mm wide tower compartment (23mm clearance)..
4,000৳ 4,500৳
Ex Tax:4,000৳
DEEPCOOL MATREXX 55 MESH ADD-RGB 4F CASE DEEPCOOL MATREXX 55 MESH ADD-RGB 4F Inside the mesh, there's a tight air hole and a non-removable dust filter configuration that barely shows three standard 120mm fans. The right part is made of metal. The I / O port is located and consists of two USB 2.0 Type-A x, one USB 3.2 Gen 1 Type-A x, HD AUDIO, RGB control buttons, and a power button. At the bottom is an engraved logo. The top has air holes at the top for smooth airflow, and the built-in dust filter is easy to attach and detach by a magnet, The metal side panels on the right are joined by two clasps at the front and clasps at the back, The air hole in the power supply unit is equipped with a dust filter to prevent dust from entering. Since it is not a slide-type, the case must be laid down for removal, The cooling fan can be equipped with a total of six front three, two top and one rear, and three front and one rear are standard, I/O Panel: USB 2.0 Type-A x 2, USB 3.2 Gen 1 Type-A x 1, HD Audio, RGB Control Button, Power Button4mm Thick Tempered Glass: DEEPCOOL MATREXX 55 MESH ADD-RGB 4F full-sized 4mm thick, tempered glass side panel gives the case a unique look to perfectly show off your inner structureMassive Cooling Compatibility: Optimized airflow is guaranteed with large air intakes on both sides of the front panel and an air exhaust in the back and on top, to keep your components coolADD-RGB Lighting System Included: 4 ADD-RGB fans are included in the system, as well as 2 control approaches.Case button control: Connect fans to the case-control module, and power up with PSU SATA cable, then control with RGB button.Motherboard control: Connect fans to motherboard header and use software to control.PSU Shroud Added: The Matrexx 55 Mesh version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tidy..
6,300৳ 6,700৳
Ex Tax:6,300৳
Technical SpecMotherboards E-ATX/ATX/Micro ATX/Mini-ITXCase Type Middle TowerMaterials ABS+SPCC+Tempered GlassProduct Dimensions (L×W×H) 440×210×480mmNet Weight 6.97 kgGross Weight 8.01 kg5.25" Drive Bays 03.5"/2.5" Drive Bays 22.5" Drive Bays 2+2I/O Ports 1×USB3.0/2×USB2.0/1×Audio(HD)/1×Mic,1×RGB ButtonExpansion Slots 7Power Supply Type ATX PS2 (maximum length: 170mm)Cable Management 23mm ClearanceCPU Cooler Height Limit 168mmVGA Length Limit 370mmCooling Fans SupportOptional: Rear: 1×120mm; Front: 3×120mm / 3×140mm; Top: 2×120/ 2×140mmLiquid Cooler Support Front: 120/140/240/280/360mm radiator; Top: 120/140/240/280mm radiator; Rear: 120mm radiatorCarton Dimension (L×W×H) 523×277×514mmEAN 6933412713784P/N DP-ATX-MATREXX55-AR-WH  MATREXX 55 WH CASE OVERVIEW A compact ATX computer case supports motherboards up to E-ATX. Full-sized 4mm thickness, tempered glass side panel, and the front panel give the case a unique look and perfectly show off your inner structure. The addressable RGB lighting strip in the front is easily controlled by a manual button or via motherboard; Supports installation of 120/140/240/280/360mm radiator liquid cooling system in the front, 120/140/240/280mm radiator liquid cooling system on top, and 120mm radiator liquid cooling system in the back. Supports 370mm (MAX) long Graphics Card installation. Optimized airflow is guaranteed with large air intakes on two sides of the front panel, keeping your components cool. The 210mm wide tower compartment with 23mm clearance is perfect for cable management. A magnetic dustproof net on top and a dust-filter in the front and bottom. With PSU shroud to keep internal neat and tidy.Visit Ultratech for more updated price in BD and follow us on Facebook for regular Offers...
4,700৳ 5,500৳
Ex Tax:4,700৳
Deepcool MATREXX 55 ADD-RGB 3F Case Deepcool MATREXX 55 ADD-RGB 3F Case has feature 3pcs of 120mm Addressable (ADD) RGB fans and an ADD RGB strip are pre-installed at the front to give you a boost of the gaming ambiance. The lighting system includes 5 pre-programmed lighting effects (dynamic color, static, breathing, comet, and fashion collision) and can be easily controlled by the RGB button on the I/O panel or motherboards with addressable RGB sync function.A compact ATX computer case supports motherboards up to E-ATX. Pre-installed 3pcs of 120mm ADD-RGB fans (CF120) and an addressable RGB strip in the front provide 5 magical lighting effects and are easily controlled by manual buttons or motherboards with synchronized lighting control via an addressable RGB function. Two extra connectors are ready to SYNC with the motherboard to control any combination of DEEPCOOL/GAMER STORM 5V ADD-RGB devices and also other brand 5V ADD-RGB devices. Full-sized 4mm thickness, tempered glass side panel, and the front panel give the case a unique look and perfectly show off your inner structure. Supports installation of 120/140/240/280/360mm radiator liquid cooling system in the front, 120/140/240/280mm radiator liquid cooling system on top, and 120mm radiator liquid cooling system in the back. Supports 370mm (MAX) long Graphics Card installation. Optimized airflow is guaranteed with large air intakes on two sides of the front panel, keeping your components cool. The 210mm wide tower compartment with 23mm clearance is perfect for cable management. A magnetic dustproof net on top and dust-filter in the front and bottom. With PSU shroud to keep internal neat and tidy...
6,600৳ 7,200৳
Ex Tax:6,600৳
Deepcool Matrexx 50 OverviewThe Deepcool Matrexx 50 Mid-Tower Case features a minimalistic design with plenty of space within for high-end hardware. It supports up to an E-ATX motherboard, two 3.5" drives, four 2.5" drives, and seven single-slot PCIe cards. Aesthetics-wise, it has 4mm tempered-glass front and side panels for a clear view of its interior, and a PSU shroud to hide cables. There's also plenty of cooling options with fan mounting locations at the front, top, and rear. Dust filters are located at the front, top, and bottom...
3,400৳ 4,500৳
Ex Tax:3,400৳
Deepcool MATREXX 50 MESH 4FS Case Deepcool MATREXX 50 MESH 4FS Case is a high airflow case that comes with four tri-color LED fans, a solid tempered glass panel, and supports up to E-ATX motherboards. Four 120mm fans come pre-installed in the MATREXX 50 MESH 4FS with three at front and one at back. The fans are lit up with a preset tri-color LED combination, simply plug in the power and enjoy the visual experience. With support for up to six 120mm or five 140mm cooling fans and also radiators up to 360mm installed in front or 240mm on top, the MATREXX 50 MESH 4FS provides ample cooling configurations. HIGH AIRFLOW DESIGN Featuring a mesh front panel with a dust filter to supply abundant airflow to solve any thermal throttling. The magnet-mounted dust filter provided at the top panel offers users easy removal and cleaning. 4MM THICK TEMPERED GLASS A full-sized 4mm thick tempered glass side panel provides a clear view of your build. PSU SHROUD Equipped with a PSU shroud to keep eliminate unsightly cables. EASY CABLE MANAGEMENT Cable management is easy with a 210mm wide tower compartment and 24mm cable clearance. ADDITIONAL STORAGE OPTIONS The MATREXX 50 MESH 4FS supports up to four 2.5" SSDs and two 3.5" HDDs through a removable drive cage. ..
4,500৳ 5,700৳
Ex Tax:4,500৳
Deepcool MATREXX 50 ADD-RGB Gaming Case Deepcool MATREXX 50 ADD-RGB Gaming Case is endowed with abundant space that supports up to E-ATX motherboard. With two large air intakes and an air exhaust, optimized airflow is guaranteed to keep your components cool. This gaming case comes with massive compatibility, Its Optimized airflow is guaranteed with two large air intakes in two sides of the front panel, and an air exhaust in the back and on the top, that helps to keep your components cool. This casing has Full-sized 4mm thickness, tempered glass side panel, and a front panel. Here, Cable managing is now easy with a 210mm wide tower compartment (24mm clearance). The MATREXX 50 ADD-RGB 4F case provides you with great building and using experiences...
5,600৳ 5,900৳
Ex Tax:5,600৳
DEEPCOOL MATREXX 50 ADD-RGB 3F Case DEEPCOOL MATREXX 50 ADD-RGB 3F Case is endowed with abundant space that supports up to E-ATX motherboard. With two large air intakes and air exhaust, optimized airflow is guaranteed to keep your components cool. MATREXX 50 ADD-RGB 3F provides you with great building and using experiences. Optimized airflow is guaranteed with two large air intakes in two sides of the front panel, and an air exhaust in the back and on the top, to keep your components cool. Full-sized 4mm thickness, tempered glass side panel, and a front panel give the case a unique look to perfectly show off your inner structure. Cable managing is now easy with a 210mm wide tower compartment (24mm clearance). MATREXX 50 ADD-RGB 3F is equipped with a PSU shroud to keep the cables and the system neat and tidy.Tempered glass side-panel and the front panel. Support installation of 120/140/240/280/360mm radiator in the front:120/140/240mm radiator on the top,120mm radiator in the rear. 210mm wide tower compartment with 24mm clearance for cable management. Supporting 160mm (max) CPU cooler height. Support 370mm (MAX) long Graphics Card installation. Magnetic dust-proof net on top, dust-filter in front, and bottom. Two large areas of air-intake on both sides of the front panel to ensure extreme cooling. A newly designed cable routing hole preset on PSU Shroud for better cable management with GPU Power cable...
5,000৳ 5,500৳
Ex Tax:5,000৳
Motherboard Mini-ITX / Micro-ATXCase Type MATX CaseProduct Dimensions 400mm×215mm×431mm(L×W×H)Carton Dimensions 470mm×288mm×470mm(L×W×H)Net Weight 5.2KGGross Weight 6.4KGColors BlackMaterials ABS+SPCC+Tempered Glass3.5" Drive Bays 22.5" Drive Bays 2External 3.5'' Drive Bays 05.25" Drive Bays 0Power Supply Type ATX PS2 (maximum length: 160mm)I/O Ports USB3.0×1、USB2.0×1、Audio×1Expansion Slots 4 SlotsCooling Fans Compatibility  Optional:Front: 120mm×3/140mm×2, Top:120mm×2/140mm×2Liquid Cooler Compatibility Front: 120/140/240/280; TOP: 120/140/240/280 Rear: 120;CPU Cooler Height Limit 165mmVGA Length Limit 320mmCable Management 20mm clearanceEAN Code 6933412714552PN Code DP-MATX-MATREXX40 MATREXX 40ESSENTIAL MICRO-ATXThe MATREXX 40 Micro-ATX case packs massive value in a tiny chassis with impressive cooling support for max airflow and a solid tempered glass panelSUBSTANTIAL COOLING CAPABILITYWith support for up to six 120mm or four 140mm cooling fans and also radiators up to 280mm installed on top or in front, the MATREXX 40 provides ample cooling configurations.BETTER AIRFLOWThe front and top mesh panels provide optimal ventilation to move large amounts of air throughout the case.ADDITIONAL STORAGE OPTIONSThe MATREXX 40 supports up to two 2.5″ SSDs and two 3.5″ HDDs through a removable drive cage...
2,900৳ 3,600৳
Ex Tax:2,900৳
DEEPCOOL MATREXX 40 3FS Case Overview DEEPCOOL MATREXX 40 3FS Case packs massive value in a tiny chassis with impressive cooling support for max airflow, three tri-color LED fans and a solid tempered glass panel.SUBSTANTIAL COOLING CAPABILITYWith support for up to six 120mm or four 140mm cooling fans and also radiators up to 280mm installed on top or in front, the MATREXX 40 3FS provides ample cooling configurations.THREE TRI-COLOR LED FANSThree 120mm fans come pre-installed in the MATREXX 40 3FS with two at the front and one at back. The fans are lit up with a preset tri-color LED combination, simply plug in the power and enjoy the visual experience.BETTER AIRFLOWThe front and top mesh panels provide optimal ventilation to move large amounts of air throughout the case.ADDITIONAL STORAGE OPTIONSThe MATREXX 40 3FS supports up to two 2.5" SSDs and two 3.5" HDDs through a removable drive cage. Features:Optimized Micro-ATX design Three 120mm tri-color LED fans included Tempered glass side panel Mesh top and front panel Support up to six 120mm or four 140mm cooling fans Support for radiators up to 280mm on top and in front Removable drive cage..
4,000৳ 4,650৳
Ex Tax:4,000৳
SPECIFICATIONSMotherboards : Micro ATX/Mini-ITX Case Type : Mini Tower Materials : ABS+SPCC (Steel panel thickness: 0.5mm) Tempered Glass side panel (thickness: 3mm) Product Dimensions (L×W×H) : 405.8×193×378.2mm Net Weight : 3.62 Kg Gross Weight : 4.33 kg 5.25" Drive Bays 1 3.5" Drive Bays 3 2.5" Drive Bays 2 I/O Ports : USB2.0×1, USB3.0×1, Audio×1, Mic×1 Expansion Slots : 4 Cooling Fans Support : Pre-installed: 1×120mm black fan at rear Optional: Front: 1×120mm Cable Management : 15mm Clearance Liquid Cooler Support Rear: 120mm radiator Power Supply Type : ATX PS2 (maximum length: 170mm) CPU Cooler Height Limit : 151mm Graphics-card Length Limit : 250mm Carton Dimension (LxWxH) : 415×240×465mm  Deepcool Matrexx 30 Mini-Tower Case The Deepcool Matrexx 30 Mini-Tower Case is a compact case designed for users looking to save some space. Compatible with micro-ATX and mini-ITX motherboards, it also has room for one 5.25" drive, three 3.5" drives, two 2.5" drives, and four single-slot PCIe components. Users may also remove the 5.25" and 3.5" drive cages if they're not needed. For cooling, it can fit one 120mm fan at the front and one 120mm fan at the rear, which is already included. Thanks to its tempered-glass side panel, users will be able to display their hardware as well as any RGB lighting they may want to install. Visit Ultratech for more updated price in BD and follow us on Facebook for regular Offers...
2,600৳ 2,900৳
Ex Tax:2,600৳
Specifications:Motherboards: Mini-ITX / Micro-ATX / ATX Materials: ABS+SPCC+Tempered Glass Product Dimensions:424.6mm×215mm×494.6mm(L×W×H) Carton Dimensions:540mm*283mm*495mm Net Weight 8.33KG Gross Weight 10.34KG 5.25" Drive Bays 0 3.5" Drive Bays 2 2.5" Drive Bays 2 I/O Panel USB3.0×2、Audio×1、Mic×1 Expansion Slots 7+2 Slots Cooling Fans Compatibility Pre-installed: Rear: 1×120mm DC fan; Optional: Front: 120mm×3/140mm×2, Top: 120mm×3/140mm×2 Power Supply Type ATX PS2 (Length less than 160mm) CPU Cooler Height Limit 165mm Liquid Cooler Compatibility Front: 120/140/240/280/360; Rear: 120 VGA Length Limit 330mm Cable Management 23mm clearanceMACUBE 310P WH MACUBE 310P WH is an ATX case that offers premium user experience. With outstanding ventilation and elegant aesthetics, it is the perfect companion for your PC system. PREMIUM BUILDING EXPERIENCE An abundance of accessories are installed on the motherboard tray to keep everything neat and safe. FAN & RADIATOR SUPPORT Supports 3*120mm fans at the top, 360mm radiators at the front. SIMPLE AND TASTEFUL Beneath its minimalistic design, details like top mesh with print, concealed front ventilation and matt paint coating add its own unique styling. MACUBE 310P WH is not just a computer case, but also a work of art.Features: Tinted, tempered glass panel, tasteful and sturdy. Snap-fit front and top panel, easy to remove and clean dust filters. Magnetic side panels, easy to maintain or upgrade hardware. Child safety lock on both magnetic panels, protecting your loved ones. An abundance of accessories are installed on the motherboard tray to keep everything neat and safe. The front intake channels remain concealed while providing more-than-sufficient ventilation. The exhaust is maxed out at the mesh top panel, no heat loitering in the case. Minimalistic design with unique styling...
5,000৳ 6,000৳
Ex Tax:5,000৳
Specifications:Motherboards: Mini-ITX / Micro-ATX / ATX Materials: ABS+SPCC+Tempered Glass Product Dimensions:424.6mm×215mm×494.6mm(L×W×H) Carton Dimensions:540mm*283mm*495mm Net Weight 8.33KG Gross Weight 10.34KG 5.25" Drive Bays 0 3.5" Drive Bays 2 2.5" Drive Bays 2 I/O Panel USB3.0×2、Audio×1、Mic×1 Expansion Slots 7+2 Slots Cooling Fans Compatibility Pre-installed: Rear: 1×120mm DC fan; Optional: Front: 120mm×3/140mm×2, Top: 120mm×3/140mm×2 Power Supply Type ATX PS2 (Length less than 160mm) CPU Cooler Height Limit 165mm Liquid Cooler Compatibility Front: 120/140/240/280/360; Rear: 120 VGA Length Limit 330mm Cable Management 23mm clearanceMACUBE 310P BK MACUBE 310P BK is an ATX case that offers premium user experience. With outstanding ventilation and elegant aesthetics, it is the perfect companion for your PC system. PREMIUM BUILDING EXPERIENCE An abundance of accessories are installed on the motherboard tray to keep everything neat and safe. FAN & RADIATOR SUPPORT Supports 3*120mm fans at the top, 360mm radiators at the front. SIMPLE AND TASTEFUL Beneath its minimalistic design, details like top mesh with print, concealed front ventilation and matt paint coating add its own unique styling. MACUBE 310P BK is not just a computer case, but also a work of art.OverviewTinted, tempered glass panel, tasteful and sturdy. Snap-fit front and top panel, easy to remove and clean dust filters. Magnetic side panels, easy to maintain or upgrade hardware. Child safety lock on both magnetic panels, protecting your loved ones. An abundance of accessories are installed on the motherboard tray to keep everything neat and safe. The front intake channels remain concealed while providing more-than-sufficient ventilation. The exhaust is maxed out at the mesh top panel, no heat loitering in the case. Minimalistic design with unique styling...
4,900৳ 5,500৳
Ex Tax:4,900৳
Showing 1 to 20 of 39 (2 Pages)