Summary |
Thermaltake Smart BX1 Power Supply Overview
Thermaltake Smart BX1 Power Supply series is built to deliver 80 PLUS Bronze efficiency. It is mainly available in 550W, 650W, and 750W models. Now mainly talk about the 650W model. The 10 RGB LEDs come preinstalled on the 120mm fan. Capable of displaying 7 colors (Red, Green, Blue, Yellow, Purple, Light Blue, and White), 3 illumination modes including Pulse, Full-lighted and RGB Cycle, and an LED Off mode. Adding personal appeal to your build has never been so easy by just pressing one RGB lighting button! There is also a built-in memory function to save the color applied and insure the same color selection every time you boot your PC. An ultra-Quite 120mm Hydraulic Bearing Fan with intelligent RPM control to guarantee superior cooling performance and silent operation. All ripples are lower than 80mV for high stability on +12V, +5V, or +3.3V from 0% to 100% load to ensure a high-quality power supply. Low ripple noise will keep your performance-critical components, such as high-end graphics cards, operating reliably for longer. A high-Quality Japanese Main Capacitor is used in this power supply which improves durability and offers the highest stability and reliability. Its Powerful single +12V rail ensures a stable and reliable supply to other PC components. Soft black cables come with a sleeve cabling design to make cable installation an easy task while powering the system at an advantageous voltage. Smart BX1 RGB series saves energy through its high energy efficiency of up to 88% and is certified to 80 PLUS Bronze. It has been optimized to work with all generations of Intel’s processors to achieve maximum energy saving. Smart BX1 RGB Series is the best idea for users to go with when they are looking for an RGB PSU that permits remarkable functionality and aesthetics in all cases.
This extreme device comes with 05 years of warranty service.
.. |
.. |
Corsair CV650 Power Supply Specification:
Key Features
Continuous Power
650 Watts
Efficiency (Approx.)
80 PLUS Efficiency Bronze
Certification
80 PLUS Bronze Certification
Fan Size
120mm
Input
Frequency Range
47~63Hz
Current
Input Current: 10A-5A
Output
Modular Type
Non-Moduler
Total Power
650 Watts
AC Input
100-240V
Connector
Main Power
ATX Connector x 1
PCI-E
2 x PCIe
SATA
7 x SATA
Floppy
Floppy Connector x 1
Warranty Information
Manufacturing Warranty
05 Years Warranty
Corsair CV650 650Watt 80 Plus Bronze Certified Power Supply
Corsair CV650 Power Supply is efficiency guaranteed to continuously deliver full wattage to your system. This CV series PSU is 80 PLUS Bronze certified, providing up to 88% efficiency for less heat and lower energy costs and also it delivers continuous power at full capacity, no matter which wattage. This CV series is also featured with 1 ATX Connector, ATX12V Version v2.31, 30°C Continuous output rated temperature C, Sleeve Fan bearing technology, 120mm Fan size, 100,000 hours MTBF hours, ATX PSU Form Factor, v2.92 EPS12V Version, 1 Floppy Connector, 2 PCIe Connector and 7 SATA Connector. A 120mm thermally controlled low-noise cooling fan only spins at high speed. This Series PSU enclosures are only 125mm long, ensuring an easy fit in almost all modern PC cases. Here, the Black sleeved cables and a black powder-coated casing seamlessly.
.. |
Cooler Master MWE 650W V2 Power Supply
Cooler Master MWE 650W V2 Power Supply efficiency rating does not reflect the quality or reliability of a PSU. It only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency rating, meaning it has a guaranteed typical efficiency of 85%. Cooler Master now reports Cybenetics noise and efficiency ratings for current power supply units where applicable. Power comes in multiple voltage levels. The wall delivers power in one voltage level but your components each need a specific voltage to operate properly.
The process of converting raw power from the wall to the multiple voltage levels your parts need requires special components to complete this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC + LLC technology was painstakingly crafted to accomplish this goal. The Dual Forward circuit layout has been designed to convert 12V power to 3V and 5V levels with minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your connected hardware. The many processes required by a power supply unit in order to take power directly from the wall or other fixed power source, convert it to the correct output required by the connected components, and then distribute that power to said components safely can be full of risks. This is why it’s important for a PSU to have the right protections and regulations to ensure this process runs correctly. The constant struggle between cooling and noise is as old as the consumer PC industry itself. Keeping your components cool without having to hear about it while you work is still one of the greatest challenges for all fan-based cooling technologies.
The MWE Bronze tackles this problem with a 120mm HDB fan. The hydrodynamic fan bearing creates less friction, making it great for low RPM operations. This technology keeps the fan running smoothly and efficiently for longer, keeping the noise level down and extending the lifespan of the PSU. For many PC Builders with aesthetics in mind, cabling can be one of the most troublesome parts of assembling a PC. Cables can be confusing, too short, or too long, and they almost never look good. The MWE Bronze uses flat and flexible black cables to help deal with these problems. These cables are more discrete and flexible, making them easier to implement into your system while taking up less space. This is especially useful for smaller cases and preserving airflow... |